HPSBUX0310-287
Published: 2003-10-07 17:21:26
Updated: 2003-10-30 14:12:10
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
----------------------------------------------------------------
**REVISED 01**
Source: HEWLETT-PACKARD COMPANY
SECURITY BULLETIN: HPSBUX0310-287
Originally issued: 7 October 2003
Last updated: 29 October 2003
SSRT3645 (Rev. 1) MySQL in SCM3.0
-----------------------------------------------------------------
NOTICE: There are no restrictions for distribution of this
Bulletin provided that it remains complete and intact.
The information in the following Security Bulletin should be
acted upon as soon as possible. Hewlett-Packard Company will
not be liable for any consequences to any customer resulting
from customer's failure to fully implement instructions in this
Security Bulletin as soon as possible.
-----------------------------------------------------------------
PROBLEM: MySQL version 3.23.39, which is delivered with
Servicecontrol Manager (SCM) 3.0, has potential
security vulnerabilities.
IMPACT: Unauthorized access, increase in privilege or execution
of arbitrary code.
PLATFORM: HP 9000 servers running HP-UX B.11.00 and B.11.11 only.
SOLUTION: Update the SCM central management server to use ixMySQL
version 3.23.54 which is released by the HP Internet
Express group. (See below).
Install ixMySQL version 3.23.54 or subsequent and
configure the SCM central management server to use
ixMySQL.
Note: This fix is only available if you are running
SCM 3.0 or later. Earlier versions of SCM
must be upgraded prior to applying this fix.
MANUAL ACTIONS: Yes - NonUpdate
AVAILABILITY: The solution is included herein.
CHANGE SUMMARY: Rev. 01 Clarified source for ixMySQL.
-----------------------------------------------------------------
**REVISED 01**
A. Background
Any version of Servicecontrol Manager (SCM) 3.0 (such as
B.03.00.01) was shipped with a version of MySQL (3.23.39)
which contains security defects.
For more information, see:
http://www.mysql.com/documentation/mysql/bychapter/
index.html#News-3.23.54
SCM 2.5 uses LDAP and is therefore unaffected by this issue.
Systems using SCM 2.5 that were upgraded to B.03.00.00,
B.03.00.01, B.03.00.02, B.03.00.03, or B.03.00.04 need to be
upgraded further on any HP-UX B.11.00 or B.11.11 platform.
Sytems running SCM 3.0 on HP-UX B.11.23 are not affected, as
they use ixMySQL.
-->A new version of ixMySQL can be now downloaded from:
--> http://software.hp.com/portal/swdepot/displayProductInfo.do?
+productNumber=HPUXIEXP1111
AFFECTED VERSIONS
=================
The following is a list by HP-UX revision of
affected filesets or patches and fix information.
To determine if a system has an affected version,
search the output of "swlist -a revision -l fileset"
for an affected fileset or patch, then determine if
a fixed revision or applicable patch is installed.
HP-UX B.11.00
HP-UX B.11.11
=============
mysql.MYSQL
fix: install ixMySQL revision 3.23.54 or subsequent, and
configure the SCM central management server to use
ixMySQL.
END AFFECTED VERSIONS
NOTE: This problem does not impact HP NonStop Servers nor
HP OpenVMS, nor HP Tru64 UNIX/Trucluster Server.
B. Recommended solution
If you are installing SCM 3.0 on a central management server
for the first time, follow these installation instructions:
1. If SCM 3.0 is not B.03.00.01 or later, download the latest
version on the Web at:
http://software.hp.com/products/SCMGR/download.html
2. Install SCM:
swinstall -s SCM3.0.x_depot -x reinstall=true B8339BA
3. Remove MySQL 3.23.39:
swremove MySQL
4. After MySQL is removed, check if the mysqld daemon is
still running:
ps -ef | grep mysqld
The mysqld daemon should not still be running. If it is,
stop it with:
kill -9 <PIDofmysqld>
5. Install the new ixMySQL
On HP-UX B.11.11
swinstall -s ix_MySQL_depot ixMySQL
On HP-UX B.11.00:
swinstall -s depot -x allow_incompatible=true ixMySQL
swconfig -x allow_incompatible=true ixMySQL
6. Configure SCM 3.0 to run with ixMySQL:
/opt/mx/bin/mxinitconfig -a server
If you need to update an existing central management server
running SCM 3.0 with MySQL 3.23.39, follow these
instructions:
1. Verify the version of SCM 3.0 (B8339BA):
swlist B8339BA
Note: Only B8339BA, B.03.00.01 or later is compatible
with ixMySQL. If you have B8339BA, B.03.00.00
installed, you need to upgrade to B.03.00.01
version or later and then complete this
procedure.
2. Backup the SCM database to a file in a secure directory:
/opt/mx/bin/mxrepositorysave -f $SAFEDIR/scm30save
3. Verify the backup file:
ls -l $SAFEDIR/scm30save
4. Backup the MySQL files:
tar cvf $SAFEDIR/mysql_files.tar /var/opt/mysq/mxcoredb/.
5. If the version of SCM is not B.03.00.01 or later, upgrade
to the latest version of SCM.
a. Download the latest version on the Web at:
http://www.software.hp.com/products/SCMGR/
b. Update SCM to the latest version:
swinstall -s SCM3.0.x_depot -x reinstall=true B8339BA
6. Stop SCM daemons:
/sbin/init.d/ServCtlMgr stop server
7. Remove MySQL 3.23.39:
swremove MySQL
8. After MySQL is removed, check if the mysqld daemon is still
running:
ps -ef | grep mysqld
The mysqld daemon should not still be running. If it is,
stop it with:
kill -9 <PIDofMySQL>
9. Install ixMySQL.
On HP-UX B.11.11
swinstall -s ix_MySQL_depot ixMySQL
On HP-UX B.11.00:
swinstall -s depot -x allow_incompatible=true ixMySQL
swconfig -x allow_incompatible=true ixMySQL
10. Configure SCM 3.0 to run with ixMySQL:
/opt/mx/lbin/mxconfigrepo -a -F
11. Restore the SCM 3.0 data:
/opt/mx/bin/mxrepositoryrestore -f $SAFEDIR/scm30save
12. Run SCM 3.0 with ixMySQL:
/opt/mx/bin/mxinitconfig -a server
C. To subscribe to automatically receive future NEW HP Security
Bulletins from the HP IT Resource Center via electronic
mail, do the following:
Use your browser to get to the HP IT Resource Center page
at:
http://itrc.hp.com
Use the 'Login' tab at the left side of the screen to login
using your ID and password. Use your existing login or the
"Register" button at the left to create a login, in order to
gain access to many areas of the ITRC. Remember to save the
User ID assigned to you, and your password.
In the left most frame select "Maintenance and Support".
Under the "Notifications" section (near the bottom of
the page), select "Support Information Digests".
To -subscribe- to future HP Security Bulletins or other
Technical Digests, click the check box (in the left column)
for the appropriate digest and then click the "Update
Subscriptions" button at the bottom of the page.
or
To -review- bulletins already released, select the link
(in the middle column) for the appropriate digest.
NOTE: Using your itrc account security bulletins can be
found here:
http://itrc.hp.com/cki/bin/doc.pl/screen=ckiSecurityBulletin
To -gain access- to the Security Patch Matrix, select
the link for "The Security Bulletins Archive". (near the
bottom of the page) Once in the archive the third link is
to the current Security Patch Matrix. Updated daily, this
matrix categorizes security patches by platform/OS release,
and by bulletin topic. Security Patch Check completely
automates the process of reviewing the patch matrix for
11.XX systems. Please note that installing the patches
listed in the Security Patch Matrix will completely
implement a security bulletin _only_ if the MANUAL ACTIONS
field specifies "No."
The Security Patch Check tool can verify that a security
bulletin has been implemented on HP-UX 11.XX systems providing
that the fix is completely implemented in a patch with no
manual actions required. The Security Patch Check tool cannot
verify fixes implemented via a product upgrade.
For information on the Security Patch Check tool, see:
http://www.software.hp.com/cgi-bin/swdepot_parser.cgi/cgi/
displayProductInfo.pl?productNumber=B6834AA
The security patch matrix is also available via anonymous
ftp:
ftp://ftp.itrc.hp.com/export/patches/hp-ux_patch_matrix/
On the "Support Information Digest Main" page:
click on the "HP Security Bulletin Archive".
The PGP key used to sign this bulletin is available from
several PGP Public Key servers. The key identification
information is:
2D2A7D59
HP Security Response Team (Security Bulletin signing only)
<security-alert@hp.com>
Fingerprint =
6002 6019 BFC1 BC62 F079 862E E01F 3AFC 2D2A 7D59
If you have problems locating the key please write to
security-alert@hp.com. Please note that this key is
for signing bulletins only and is not the key returned
by sending 'get key' to security-alert@hp.com.
D. To report new security vulnerabilities, send email to
security-alert@hp.com
Please encrypt any exploit information using the
security-alert PGP key, available from your local key
server, or by sending a message with a -subject- (not body)
of 'get key' (no quotes) to security-alert@hp.com.
-----------------------------------------------------------------
(c)Copyright 2003 Hewlett-Packard Company
Hewlett-Packard Company shall not be liable for technical or
editorial errors or omissions contained herein. The information
in this document is subject to change without notice.
Hewlett-Packard Company and the names of HP products referenced
herein are trademarks and/or service marks of Hewlett-Packard
Company. Other product and company names mentioned herein may be
trademarks and/or service marks of their respective owners.
________________________________________________________________
- --
-----BEGIN PGP SIGNATURE-----
Version: PGP 8.0
iQA/AwUBP6BqC+AfOvwtKn1ZEQLrOwCghQxhBkh7SGfWH2y7ST+eR02uvuQAoLcz
CWipe1OyKp+Xb2t7K/VRdaW+
=mSN5
-----END PGP SIGNATURE-----
