Adam,

We are aren't running the honeypot on the PLC, but are using honeyd
(on a Linux box) to simulate the external interfaces of the PLC. So
that hasn't been an issue. Plus we are only simulating a base amount
of functional. Right now it isn't possible to actually program the
"PLC Honeypot" using RSLogix or whatever, and I'm not sure that would
be worth the effort.

- mdf

--
| Matthew Franz mdfranz (at) io (dot) com [email concealed] |
| http://www.io.com/~mdfranz |

> On the PLC side of things..... have you had much trouble with lack of
> memory in the units? We use Koyo and Allen-Bradley PLC's all the time
> and our programs just to run our equipment takes up most of the
> availible memory. So, a honeypot application would be a bit bigger, right?
>
>
> vkp wrote:
>
> >Hello,
> >
> >We started out a project to investigate the feasibility of building a
> >software-based framework to simulate a variety of industrial networks
> >such as SCADA, DCS, and PLC architectures with some help from
> >existing tools like honeyd.
> >
> >The project is on at http://scadahoneynet.sourceforge.net/. We
> >would appreciate any suggestions, coments and help :)
> >
> >Thanks.
> >
> >
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by the new InstallShield X.
> >From Windows to Linux, servers to mobile, InstallShield X is the
> one installation-authoring solution that does it all. Learn more and
> evaluate today! http://www.installshield.com/Dev2Dev/0504
> _______________________________________________
> Scadahoneynet-talk mailing list
> Scadahoneynet-talk (at) lists.sourceforge (dot) net [email concealed]
> https://lists.sourceforge.net/lists/listinfo/scadahoneynet-talk

[ reply ]