You are most likely at a pixfirewall# prompt (or whatever your pix hostname is) type:
! Move into configuration mode
config t
!
! Add new DNS reference.
vpngroup vpnusers dns-server 10.10.10.2
!
! Remove old DNS reference (if required)
no vpngroup vpnusers dns-server 10.10.10.1
!
! Test
!
! Save current config.
wr mem
Robert
From: jharvey_support (at) sbcglobal (dot) net [email concealed]
Sent: Thu 1/17/2008 8:31 AM
To: firewalls (at) securityfocus (dot) com [email concealed]
Greetings,
I need to change the
vpngroup vpnusers dns-server 10.10.10.1
to
vpngroup vpnusers dns-server 10.10.10.2
I'm a newbie that needs to make a local backup copy of configurations and change the dns server ip.
I should go from enable mode to configure mode, correct? What is the exact syntax of the command?
Thanks for your help.
J.H.
<HTML><HEAD></HEAD>
<BODY>
<DIV id=idOWAReplyText51106 dir=ltr>
<DIV dir=ltr><FONT face=Arial color=#000000 size=2>You are most likely at a pixfirewall# prompt (or whatever your pix hostname is) type:</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial size=2>! Move into configuration mode</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>config t</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>!</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>! Add new DNS reference.</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>vpngroup vpnusers dns-server 10.10.10.2</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>!</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>! Remove old DNS reference (if required)<BR>no vpngroup vpnusers dns-server 10.10.10.1</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>!</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>! Test</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>!</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>! Save current config.</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>wr mem<BR></FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>Robert</DIV></FONT></DIV>
<DIV dir=ltr><BR></DIV>
<DIV dir=ltr>
<HR tabIndex=-1>
</DIV>
<DIV dir=ltr><FONT face=Tahoma size=2><B>From:</B> jharvey_support (at) sbcglobal (dot) net [email concealed]<BR><B>Sent:</B> Thu 1/17/2008 8:31 AM<BR><B>To:</B> <A href="mailto:firewalls (at) securityfocus (dot) com [email concealed]" target=_blank>firewalls (at) securityfocus (dot) com [email concealed]</A></FONT></DIV>
<DIV dir=ltr> </DIV>
<DIV dir=ltr>Greetings,<BR><BR>I need to change the <BR><BR>vpngroup vpnusers dns-server 10.10.10.1 <BR><BR>to<BR><BR>vpngroup vpnusers dns-server 10.10.10.2<BR><BR>I'm a newbie that needs to make a local backup copy of configurations and change the dns server ip.<BR><BR>I should go from enable mode to configure mode, correct? What is the exact syntax of the command?<BR><BR>Thanks for your help.<BR><BR>J.H.<BR><BR></DIV></BODY></HTML>
! Move into configuration mode
config t
!
! Add new DNS reference.
vpngroup vpnusers dns-server 10.10.10.2
!
! Remove old DNS reference (if required)
no vpngroup vpnusers dns-server 10.10.10.1
!
! Test
!
! Save current config.
wr mem
Robert
From: jharvey_support (at) sbcglobal (dot) net [email concealed]
Sent: Thu 1/17/2008 8:31 AM
To: firewalls (at) securityfocus (dot) com [email concealed]
Greetings,
I need to change the
vpngroup vpnusers dns-server 10.10.10.1
to
vpngroup vpnusers dns-server 10.10.10.2
I'm a newbie that needs to make a local backup copy of configurations and change the dns server ip.
I should go from enable mode to configure mode, correct? What is the exact syntax of the command?
Thanks for your help.
J.H.
<HTML><HEAD></HEAD>
<BODY>
<DIV id=idOWAReplyText51106 dir=ltr>
<DIV dir=ltr><FONT face=Arial color=#000000 size=2>You are most likely at a pixfirewall# prompt (or whatever your pix hostname is) type:</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial size=2>! Move into configuration mode</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>config t</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>!</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>! Add new DNS reference.</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>vpngroup vpnusers dns-server 10.10.10.2</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>!</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>! Remove old DNS reference (if required)<BR>no vpngroup vpnusers dns-server 10.10.10.1</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>!</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>! Test</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>!</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>! Save current config.</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>wr mem<BR></FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>Robert</DIV></FONT></DIV>
<DIV dir=ltr><BR></DIV>
<DIV dir=ltr>
<HR tabIndex=-1>
</DIV>
<DIV dir=ltr><FONT face=Tahoma size=2><B>From:</B> jharvey_support (at) sbcglobal (dot) net [email concealed]<BR><B>Sent:</B> Thu 1/17/2008 8:31 AM<BR><B>To:</B> <A href="mailto:firewalls (at) securityfocus (dot) com [email concealed]" target=_blank>firewalls (at) securityfocus (dot) com [email concealed]</A></FONT></DIV>
<DIV dir=ltr> </DIV>
<DIV dir=ltr>Greetings,<BR><BR>I need to change the <BR><BR>vpngroup vpnusers dns-server 10.10.10.1 <BR><BR>to<BR><BR>vpngroup vpnusers dns-server 10.10.10.2<BR><BR>I'm a newbie that needs to make a local backup copy of configurations and change the dns server ip.<BR><BR>I should go from enable mode to configure mode, correct? What is the exact syntax of the command?<BR><BR>Thanks for your help.<BR><BR>J.H.<BR><BR></DIV></BODY></HTML>
[ reply ]