(Page 2 of 12)   < Prev  1 2 3 4 5 6 7 8 9 10 11  Next >

Category: Intrusion Detection » Network

Gentle MAC Pro
Added 2006-04-29
by Solar System Technologies
Gentle MAC allows operating your network devices automatically as well as manually and changing MAC and IP address as well. Gentle MAC is user-friendly, secure and reliable utility among similar products. Change your IP and MAC address simultaneously! After installation Gentle MAC it is ready to use and no additional settings are required. If you are IT security expert or network administrator and you require verification of authentication system of your Internet provider, if you are online gamer and you need to operate your network devices gingerly; or you have other reasons to change IP and MAC address, choose Gentle MAC as it is one of the best facility now in use. Developers of Gentle MAC keep developing the product and are at comprehensive technical support of the users.

Network Equipment Performance Monitor
Added 2006-03-16
by Nova Software, Inc.
NEPM is a very general, highly configurable, two part software system that monitors any type of logged data from IP networked equipment and reports it via E-mail and web pages. Current conditions and history from systems based on Windows NT/2000 and UNIX can be tracked and reported. Most major server, switch and router systems can be monitored, without running agents on the target systems. Many networks behind separate firewalls can be reported on at one central site, and hard-to-reach isolated nets can be accessed. NEPM itself is system independent and can be hosted on either a UNIX or WinNT system or a combination of these with equal ease. NEPM monitors and reports uptime, critical events such as intrusion attempts, access rates, bytes-transferred rates, and error rates of network nodes. Unique precursor event links drill down instantly to the causes of downtime, intrusion events, etc. Performance graphs highlight element throughput and error rate. Hardware and software sub-systems within nodes are tracked and reported separately but in a common format that makes possible direct comparison. True hardware uptime is reported so that hardware and software performance can be separated from that of the communications links and from each other. Summary reports and alerts aggregate a view of an entire network's status onto a single page. Reports are provided via web pages posted to a web server for instant access to results. E-mailed text alerts provide prompt notification of dangerous conditions. NEPM is managed via a browser interface, providing full local or remote control from anywhere on the network. Use NEPM to increase your network uptime, increase network security, monitor QOS and SLA's, and evaluate new equipment. Equipment monitored can be Windows or Linux/UNIX/FreeBSD servers, or any processor-based system that logs events to non-volatile storage and has a telnet/rlogin/ssh/IP stream-mode interface

Security Center Lite
Added 2006-02-24
by Lan-Secure
Security Center is network security software for real-time intrusion detection and prevention that helps to protect networks from potential intruders, unauthorized network connections and malicious network activities. Security Center key features are: Online network discovery, Automatic threat and vulnerability monitoring, Manual or automatic protection against potential intruders, Proactive blocking on unauthorized network connections, Email and SNMP alerts forwarding, Daily and weekly email reports, Threats and vulnerabilities statistics, Database exporting capabilities and wireless networks support. The Lite version supports up to 100 nodes.

Firewall Test Agent
Added 2006-01-18
by Nathan House
This simple tool can be used to test and log the rules on a firewall. The Firewall Test Agent is able to open up any number of TCP and UDP ports on a windows machine and log any connection attempts. A port scanner or other such tool can then be used to scan through the firewall to find which ports have been allowed through in the firewall rule base. This tool is useful when you don't have access to the firewall rules. This tool could also be used as a port scan monitor if you are interested in the number of scans your networks are receiving. WARNING: Some machines will NOT be able to open thousands of ports. With older, slower and heavily utilized machines you should only open a few thousand ports at a time. I do not recommend any more than 10,000 ports at any one time although 65,535 if theoretically possible.

Prelude Hybrid IDS Framework
Added 2005-09-21
by Yoann Vandoorselaere
Prelude is a Hybrid IDS framework, that is, a product enabling all security applications, be it open-source or proprietary, to report to a centralized system. In order to achieve this task, Prelude relies on the IDMEF (Intrusion Detection Message Exchange Format) IETF standard, that enables different kinds of sensors to generate events using a unique language.

WiFiManager
Added 2005-08-17
by AdventNet
Integrated wlan security and Management tool. Identifies the vulnerabilities in the wlan, the intrusion attempts and mitigates wlan attacks. Helps in configuring the Access Points and in firmware upgrade.

Libnids
Added 2005-03-21
by Rafal Wojtczuk
NIDS E-box implementation; emulates linux 2.0.36 TCP/IP stack. It provides IP defragmentation, TCP reassembly, portscan detection.

IDS Policy Manager
Added 2004-11-30
by ActiveWorx
IDS Policy Manager was designed to manage Snort IDS sensors in a distributed environment. This is done by having the ability to take the textconfiguration and rule files and allow you to modify them with an easy touse graphical interface. With the added ability to merge new rule sets,manage preprocessors, control output modules and scp rules to sensors, thistool makes managing snort easy for most security professionals.

Honeynet Security Console
Added 2004-08-18
by Activeworx, Inc.
Honeynet Security Console is an analysis tool to view events on your personal honeynet. It gives you the power to view events from Snort, TCPDump, Firewall, Syslog and Sebek logs. It also allows you to correlate events from each of these data types to have a full grasp of the attackers' actions.

Anti-Cracker Shield
Added 2004-07-19
by SoftSphere
Protect your computer from Internet worms and hackers' attacks, which become possible due to the operational system and software vulnerabilities ("exploits"). Neither antiviruses, nor firewalls can protect from exploits. Only Anti-Cracker Shield, a multilevel security system is able to cope with all known and unknown versions of "exploits". It is possible and is necessary to protect from hackers!

Search Tools
Keyword:
Platform:
Category:
Browse by category
Auditing
Log Analysis, Host, Passwords, Network, File Integrity, PSTN, Forensics, Backdoors, Source Code
Sniffers
Recovery
Passwords
Utilities
Passwords, Filesystem, Network, System, Compiler, Log Management, Usage Monitoring, Email
Authentication
One Time Passwords, User Authentication, Password Management, Web, Server, Certificates, Tokens
Intrusion Detection
Network, Host, Web, Evasion
Access Control
Network, Firewall, user privileges, RPC, Bootup, File System, Applications, Mandatory Access Control, Server, X-Windows, ACLs, Privileges
Replacement
Libraries, Applications
Programming
Libraries
Cryptography
Libraries, Random Numbers, Traffic Encryption, Data Encryption, Cryptoanalysis, Steganography, E-mail
Network Monitoring
Policy Enforcement
Web Access, Email
System Security Management
Accounts, Console, Windows NT, Firewall, Configuration, Filesystem, Linux, Solaris, Monitoring
Network Utilities
Tunneling, Miscellaneous, Monitoring
Rootkits
Secure Deletion
Hardening
Linux, FreeBSD, NT, Solaris
Hostile Code
Detection, Removal, Sandbox


 

Privacy Statement
Copyright 2010, SecurityFocus