Back to list
[security bulletin] HPSBUX02960 SSRT101419 rev.3 - HP-UX Running NTP, Remote Denial of Service (DoS)
May 23 2014 11:23PM
security-alert hp com
-----BEGIN PGP SIGNED MESSAGE-----
Note: the current version of the following document is available here:
SUPPORT COMMUNICATION - SECURITY BULLETIN
Document ID: c04084148
HPSBUX02960 SSRT101419 rev.3 - HP-UX Running NTP, Remote Denial of Service
NOTICE: The information in this Security Bulletin should be acted upon as
soon as possible.
Release Date: 2014-01-13
Last Updated: 2014-05-23
Potential Security Impact: Remote Denial of Service (DoS)
Source: Hewlett-Packard Company, HP Software Security Response Team
A potential security vulnerability has been identified with HP-UX running
NTP. The vulnerability could be exploited remotely to create a Denial of
References: CVE-2013-5211 (SSRT101419)
SUPPORTED SOFTWARE VERSIONS*: ONLY impacted versions are listed.
HP-UX B.11.31 running NTP v4.2.6 or XNTP v3.5
HP-UX B.11.23 running XNTP v3.5
CVSS 2.0 Base Metrics
Reference Base Vector Base Score
CVE-2013-5211 (AV:N/AC:L/Au:N/C:N/I:N/A:P) 5.0
Information on CVSS is documented
in HP Customer Notice: HPSN-2008-002
HP has provided the following workaround to temporarily resolve this
vulnerability. This bulletin will be revised when a General Release patch for
HP-UX B.11.31 is available.
NOTE: No patches for XNTP v3.5 on HP-UX B.11.23 and HP-UX B.11.31 will be
made. Customers must disable "monlist" as follows.
MANUAL ACTIONS: Yes
To prevent the "monlist" DoS vulnerability, configure the following:
Verify that XNTP is installed, is running on your system, and verify the
a. Verify XNTP is installed on the system:
ls -la /usr/sbin/xntpd
For NTP v4:
lr-xr--r-- 1 bin bin 14 Aug 9 2013 /usr/sbin/xntpd -> /usr/sbin/ntpd
For XNTP v3.5:
lr-xr--r-- 1 bin bin 741052 May 9 2013 /usr/sbin/xntpd -> /usr/sbin/ntpd
b. Check if the NTP process is running
ps -ef | grep ntp
For NTP v4:
root 124 1 0 06:46:18 ? 0:00 /usr/sbin/ntpd
For XNTP v3.5:
root 22248 1 0 06:25:28 ? 0:00 /usr/sbin/xntpd
c. Verify the NTP v4 version
For NTP v4:
For XNTP v3.5:
ntpd 4.2.6 Revision 0.0 Tue Nov 5 14:21:22 UTC 2012
Modify the ntp.conf on your time server and add either one of the two
Entry Option #1
# Block all control queries from external systems, allows time services
restrict default noquery
# Allow local queries
Entry Option #2
# disable "monitor" queries. This will disable only
# monlist queries, even local.
Cycle the ntpd daemon (for NTP v4 and XNTP v3.5).
Verification of the workaround.
Test on the local time server using the "ntpq -p" command.
Verify proper operation with output similar to:
remote refid st t when poll reach delay offset disp
*LOCAL(1) .LOCL. 6 l 13 16 377 0.000 0.000 0.233
On a remote time client, execute ntpdc or xntpdc as follows:
# ntpdc -c monlist server.name.with.restrict.or.disable
# xntpdc -c monlist server.name.with.restrict.or.disable
A timeout error should occur.
# xntpdc -c monlist xyz.hp.com
xyz.hp.com: timed out, nothing received
***Request timed out
Version:1 (rev.1) - 13 January 2014 Initial release
Version:2 (rev.2) - 15 January 2014 Added configuration options in workaround
Version:3 (rev.3) - 23 May 2014 Expanded Supported Software Versions scope;
added HP-UX B.11.23 and HP-UX B.11.31 XNTP workaround
Third Party Security Patches: Third party security patches that are to be
installed on systems running HP software products should be applied in
accordance with the customer's patch management policy.
Support: For issues about implementing the recommendations of this Security
Bulletin, contact normal HP Services support channel. For other issues about
the content of this Security Bulletin, send e-mail to security-alert (at) hp (dot) com. [email concealed]
Report: To report a potential security vulnerability with any HP supported
product, send Email to: security-alert (at) hp (dot) com [email concealed]
Subscribe: To initiate a subscription to receive future HP Security Bulletin
alerts via Email:
Security Bulletin Archive: A list of recently released Security Bulletins is
Software Product Category: The Software Product Category is represented in
the title by the two characters following HPSB.
3C = 3COM
3P = 3rd Party Software
GN = HP General Software
HF = HP Hardware and Firmware
MP = MPE/iX
MU = Multi-Platform Software
NS = NonStop Servers
OV = OpenVMS
PI = Printing and Imaging
PV = ProCurve
ST = Storage Software
TU = Tru64 UNIX
UX = HP-UX
Copyright 2014 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company shall not be liable for technical or editorial errors
or omissions contained herein. The information provided is provided "as is"
without warranty of any kind. To the extent permitted by law, neither HP or
its affiliates, subcontractors or suppliers will be liable for
incidental,special or consequential damages including downtime cost; lost
profits; damages relating to the procurement of substitute products or
services; or damages for loss of data, or software restoration. The
information in this document is subject to change without notice.
Hewlett-Packard Company and the names of Hewlett-Packard products referenced
herein are trademarks of Hewlett-Packard Company in the United States and
other countries. Other product and company names mentioned herein may be
trademarks of their respective owners.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
-----END PGP SIGNATURE-----
[ reply ]
Copyright 2010, SecurityFocus