Back to list
[security bulletin] HPSBGN03164 rev.1 - HP IceWall SSO Dfw, SSO Certd and MCRP running OpenSSL, Remote Disclosure of Information
Nov 11 2014 04:39PM
security-alert hp com
-----BEGIN PGP SIGNED MESSAGE-----
Note: the current version of the following document is available here:
SUPPORT COMMUNICATION - SECURITY BULLETIN
Document ID: c04496538
HPSBGN03164 rev.1 - HP IceWall SSO Dfw, SSO Certd and MCRP running OpenSSL,
Remote Disclosure of Information
NOTICE: The information in this Security Bulletin should be acted upon as
soon as possible.
Release Date: 2014-11-10
Last Updated: 2014-11-10
Potential Security Impact: Remote disclosure of information
Source: Hewlett-Packard Company, HP Software Security Response Team
A potential security vulnerability has been identified with HP IceWall SSO
Dfw , SSO Certd, and MCRP running OpenSSL.
This is the SSLv3 vulnerability known as "Padding Oracle on Downgraded Legacy
Encryption" or "Poodle", which could be exploited remotely resulting in
disclosure of information..
References: CVE-2014-3566 (SSRT101789)
SUPPORTED SOFTWARE VERSIONS*: ONLY impacted versions are listed.
- HP IceWall MCRP v2.1, v3.0
- HP IceWall SSO Dfw v8.0, v8.0 R1, v8.0 R2, v8.0 R3, and v10.0
- HP IceWall SSO Certd v8.0R3 with DB plugin patch 2 and v10.0
CVSS 2.0 Base Metrics
Reference Base Vector Base Score
CVE-2014-3566 (AV:N/AC:M/Au:N/C:P/I:N/A:N) 4.3
Information on CVSS is documented
in HP Customer Notice: HPSN-2008-002
HP recommends the following software updates and workaround instructions to
resolve this vulnerability for HP IceWall SSO Dfw, SSO Certd, and MCRP.
The software updates are available at:
- There are no updates or mitigations for MCRP 2.1 and Dfw
- HP recommends updating these older versions to the latest versions and
patches and then following the WORKAROUND INSTRUCTIONS below.
- The WORKAROUND INSTRUCTIONS should be followed after applying the
Software Update Versions
HP IceWall MCRP 3.0 Patch release 1
HP IceWall SSO Dfw 10.0 Patch release 7
Note: Both software update versions provide the use of TLSv1 which is not
vulnerable and available for each supported platform.
HP recommends the following information to protect against potential risk
for the following HP IceWall products.
HP IceWall SSO Dfw and MCRP
- If possible, do not use the SHOST setting which allows IceWall SSO
Dfw or MCRP to use SSL/TLS protocol to back-end web servers.
- The following steps should be applied if SSL/TLS protocol to back-end
web servers must be used:
o For MCRP: apply MCRP patch release 1
o For Dfw: apply Dfw patch release 7 or later
o Set SSL_PROTOCOL parameter to TLSv1
HP IceWall SSO Certd
- For Certd version 10.0 and 8.0R3: apply DB plugin patch release 2
- If possible, do not use the LDAPSSL setting which allows IceWall SSO
Certd to connect to the LDAP server using SSL/TLS protocol.
- If SSL/TLS protocol must be used to LDAP server, configure the LDAP
server to use only TLSv1 as a mitigation for the vulnerability. For example,
on an OpenLDAP server (slapd), Set the TLSProtocolMin parameter.
Note: The HP IceWall product is only available in Japan.
Version:1 (rev.1) - 10 November 2014 Initial release
Third Party Security Patches: Third party security patches that are to be
installed on systems running HP software products should be applied in
accordance with the customer's patch management policy.
Support: For issues about implementing the recommendations of this Security
Bulletin, contact normal HP Services support channel. For other issues about
the content of this Security Bulletin, send e-mail to security-alert (at) hp (dot) com. [email concealed]
Report: To report a potential security vulnerability with any HP supported
product, send Email to: security-alert (at) hp (dot) com [email concealed]
Subscribe: To initiate a subscription to receive future HP Security Bulletin
alerts via Email:
Security Bulletin Archive: A list of recently released Security Bulletins is
Software Product Category: The Software Product Category is represented in
the title by the two characters following HPSB.
3C = 3COM
3P = 3rd Party Software
GN = HP General Software
HF = HP Hardware and Firmware
MP = MPE/iX
MU = Multi-Platform Software
NS = NonStop Servers
OV = OpenVMS
PI = Printing and Imaging
PV = ProCurve
ST = Storage Software
TU = Tru64 UNIX
UX = HP-UX
Copyright 2014 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company shall not be liable for technical or editorial errors
or omissions contained herein. The information provided is provided "as is"
without warranty of any kind. To the extent permitted by law, neither HP or
its affiliates, subcontractors or suppliers will be liable for
incidental,special or consequential damages including downtime cost; lost
profits; damages relating to the procurement of substitute products or
services; or damages for loss of data, or software restoration. The
information in this document is subject to change without notice.
Hewlett-Packard Company and the names of Hewlett-Packard products referenced
herein are trademarks of Hewlett-Packard Company in the United States and
other countries. Other product and company names mentioned herein may be
trademarks of their respective owners.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
-----END PGP SIGNATURE-----
[ reply ]
Copyright 2010, SecurityFocus